Showing all 9 results

Out Of Stock

Creality 3D Printer Tool Box Kit

MVR 750.00
SKU: I079838

Features

18 tools in the kit: (Spade; Open-ended wrench; Φ 0.38mm needle; Feeler gauge; Φ 1.0mm needle; Pointed-nose pliers; Pincer pliers; Tubing cutter; SD reader; Cross socket wrench; The knife; Nippers; A screwdriver; Cross screwdriver M6 socket wrench; M8 socket wrench; Tweezers; Allen key )

Sturdy, standing wear and tear: The steel tool is made of 45 carbon steel, which has high strength and good mechanical properties.

A small box and convenient carrying: The toolbox with small size adopts the foam to reduce the weight, which makes the box more light and convenient to carry.

High strength and good toughness: The toolbox is made of ABS material with higher density. The ABS material has heat resistance, impact resistance, low-temperature resistance, chemical resistance, and electrical properties and stability, which makes the box more solid.

Product Parameters

Product name: Toolbox kit

Material: ABS

Product size: 330x272x82mm

Package size: 340x290x85mm

N.W.: 1138g

Package Weight: 1280g

Out Of Stock

Creality 3D Printing Spare CR-10max Nozzle Kit

MVR 490.00
SKU: I079837

Resistance:R(25°C)= 100k±1%
Operating Temperature Range:-40°C~+250°C
Connection Method:external line connection
Heating Block:24V 40W
Application:3D printer
Nozzle Size:1.75mm 0.4mm

Out Of Stock

Creality 3D Printing Spare CR-10SPRO Nozzle Kit

MVR 740.00
SKU: I079834

New advancements and developments in 3D Printing are always exciting, but sometimes they can pose a few compatibility problems with older machines. Fortunately, however, having this problem is much better than having the problem of stale and outdated technology that never gets updated. This is why we’re excited with the new Creality CR-10S Pro Hotend Assembly, which is designed for the Creality CR-10S Pro, and features the full range of new features that make the CR-10S Pro the new flagship model for Creality 3D.

This hotend assembly is supplied from Creality, and can be directly swapped out with no extra modifications required. The reason why it’s not compatible with older models, however, is because these components utilise an M6-0.75 thread, which results in a tighter fit with less leaks, as well as more grip between the components over a shorter length. This is one of the reasons why the tolerances are so impressive on these new Pro variation components, but of course the downside is that these components can’t be used with older Creality 3D Printers.

Out Of Stock

Creality 3D Printing Spare Direct – Drive Kit

MVR 750.00
SKU: I079835
  • Compatibility with – Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
  • Easy to Install and Use – Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn’t affect the inherent function of the printer because it’s a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
  • Direct Extruding Smooth Feed-in – Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
  • Integrated All Metal Hot end – It’s sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
  • Printing at High – Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.

 

Out Of Stock

Creality 3D Printing Spare Ender-3 Hotend Kit

MVR 200.00
SKU: I079833

If your Ender 3 or Ender 3 Pro printer is completely stuck, don’t worry, we have the solution: the original Creality brand hotend spare part. It includes all the necessary components to print; a 0.4 nozzle, a Teflon tube, an aluminium heating block, a thermistor cable to measure the temperature, the thermistor cartridge and a black sock to keep the heating block clean and protected. All you have to do is remove the old one and install it.

Specifications:

  • Material: aluminum, stainless steel and brass
  • 3D Printer Compatibility: Ender 3
  • Filament compatibility: diameter of 1.75 mm
  • Nozzle size: 0.4mm
  • Throat length: 30mm
  • Aluminum block size: 20mm x 20mm x 10mm
  • Operating temperature range: -40 ~ + 260 ° C (-40 ~ + 500 ° F)
  • 100% new and high quality
  • Original Creality replacement
  • Nozzle tip, aluminum heating block, throat tube (built-in Teflon).
  • Heating cartridge 24 V 40 W.
Out Of Stock

Creality 3D Printing Spare Ender-3V2 Nozzle Kit

MVR 280.00
SKU: I079832

Specifications:
Works With: Ender-3 V2
Nozzle Size: 0.4mm
Tube Length: Approx. 37cm Long
Thermistor and Cable Length: 130cm
Throat Pipe Length: 30mm
Aluminum Block Size: Approx. 20 * 20 * 10mm
Operating Temperature Range: -40~+260°C (-40~+500°F)

Out Of Stock

Creality BL Touch Auto Leveling Kit – 32bit

MVR 1,100.00
SKU: I079829
  • 【Widely Application】: Creality BL Touch works for Creality Ender3 v2/Ender3/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro with 32 bit v 4.2.2/4.2.7 mainboard.(Require 3d printer with 32 bit V4.2.2 or V4.2.7 motherboard )
  • 【Easy Firmware Installation】: Simply download the BLTouch firmware(Note:words “without adapter”firmware) from the Creality Official Website and save the file to your printer’s memory card. Insert the card in to your printer. Turn on the printer and wait a few seconds for the firmware to install.
  • 【Easy to Install and Use】3 kinds of Different mounting brackets allows for installation on several of our printers.
  • 【High-precision】Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy.
  • 【Genuine High Quality Set】Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
Out Of Stock

Creality BL Touch Auto Leveling Kit – 8bit

MVR 1,100.00
SKU: I079828

reality now offers an upgrade to add auto bed levelling to a wide range of their printers.  They joined efforts with BL Touch (the most popular auto bed leveling sensor in the world) to bring you a high quality auto bed levelling experience.   This upgrade can be easily installed on some of the CR-10 and Ender printer ranges, please see below for applicable printers.

The kit includes:

  • BL Touch Sensor
  • Mounting Plate
  • Connecting interfaces
  • BL Touch Cables
  • Boot loader with ribbon cable
  • Cable ties
  • Mounting Screws
  • Spare BL Touch pin
  • Instructions
Out Of Stock

Creality Filament Dry Box 1kg Tray

MVR 990.00
SKU: I079846

Heat and dry, Dust-proof and Moisture-proof

 

Strong compatibility, adapt to a variety of wire diameters:

 

Compatible with most of the 1kg filament reels on the market and different filaments with a variety of wire diameters.

 

Operating time adjustment range: off/2/4/8 hours/ normally open